Restore woofers/midrange OA-116 R
-
- (15+ posts)
- Posts: 18
- Joined: Wed 07 Mar 2007, 06:24
Restore woofers/midrange OA-116 R
Hello to you all.
First time in the forum so I.m new in this matter ( Carlsson/ Sonab)
A friend offer me a pair of OA-116 R in very mint condition, only the woofers/ mids need new rubber rings.
Anyone with links to buy good rings? I can repair them myself cause the rest of speakers are very good including the impedance values.
Thanks.
First time in the forum so I.m new in this matter ( Carlsson/ Sonab)
A friend offer me a pair of OA-116 R in very mint condition, only the woofers/ mids need new rubber rings.
Anyone with links to buy good rings? I can repair them myself cause the rest of speakers are very good including the impedance values.
Thanks.
-
- (15+ posts)
- Posts: 18
- Joined: Wed 07 Mar 2007, 06:24
-
- (10+ posts)
- Posts: 11
- Joined: Thu 28 Sep 2006, 20:13
- Location: Helsingør, Danmark
-
- (15+ posts)
- Posts: 18
- Joined: Wed 07 Mar 2007, 06:24
-
- (10+ posts)
- Posts: 11
- Joined: Thu 28 Sep 2006, 20:13
- Location: Helsingør, Danmark
Here is a few to try i Germany.
http://www.lautsprecher-team.de
http://lup-berlin.de/reparatur_iso.htm
http://www.tuned-systems.de/indexrep.htm
http://www.riedservice.de/cms/t5.repara ... ervice.htm
http://www.lautsprecher-team.de/
www.lautsprecher-manufaktur.dehttp://ww ... m_neu.html
http://www.newfoam.com/kits_ge.asp
Good luck.
http://www.lautsprecher-team.de
http://lup-berlin.de/reparatur_iso.htm
http://www.tuned-systems.de/indexrep.htm
http://www.riedservice.de/cms/t5.repara ... ervice.htm
http://www.lautsprecher-team.de/
www.lautsprecher-manufaktur.dehttp://ww ... m_neu.html
http://www.newfoam.com/kits_ge.asp
Good luck.
About speaker edges
I ordered mine, for my OA2212, from http://www.speakerbits.com in Australia.
After enquiring around (here also) I was advised to NOT go for the rubber edging. Speakerbits sell both - at the same price - but the rubber edgeing causes the "sweetness" to be lost on the woofers/midranges.
Later upgrades to these drivers as sold by hifikit in Sweden have rubber surrounds - but then the whole cone, no doubt has been adjusted to take this into account.
The advice I received, was to replace with this kit, enough for two drivers:
1 kit 0651K (2 edges)
DC060P (2) dustcaps
It comes with comprehensive instructions, shims and glue and anyone who is a least bit "handy" can do the job.
ColesKing
After enquiring around (here also) I was advised to NOT go for the rubber edging. Speakerbits sell both - at the same price - but the rubber edgeing causes the "sweetness" to be lost on the woofers/midranges.
Later upgrades to these drivers as sold by hifikit in Sweden have rubber surrounds - but then the whole cone, no doubt has been adjusted to take this into account.
The advice I received, was to replace with this kit, enough for two drivers:
1 kit 0651K (2 edges)
DC060P (2) dustcaps
It comes with comprehensive instructions, shims and glue and anyone who is a least bit "handy" can do the job.
ColesKing
-
- (15+ posts)
- Posts: 18
- Joined: Wed 07 Mar 2007, 06:24
Restore woofers/midrange OA-116R
I´ve ordered several spares for speakers from speakerbits.com and have never been disappointed. Try them!
-
- (15+ posts)
- Posts: 18
- Joined: Wed 07 Mar 2007, 06:24
Who is online
Users browsing this forum: No registered users and 4 guests